pvtsolarheader01
pvtsolarheader03
pvtsolarheader05
pvtsolarheader07
pvtsolarheader08
pvtsolarheader06
pvtsolarheader10
pvtsolarheader09
pvtsolarheader12
pvtsolarheader04
pvtsolarheader02
pvtsolarheader11

Reference project Villetta Brissago

The beautiful villetta is located on the south-eastern slope of Brissago. On the steeply sloping terrain, an ideally sunny "energy railing" with PVT Solar hybrid collectors was installed at the boundary of the property. In combination with the heat pump, the hydrobus, the control system and the ground
control system and the earth register, these 10 modules provide the energy for the heating, the hot water and the swimming pool.

Planning: RINO Electronics AG
Realisation: B-Solartec AG

Total system consisting of:
10 PVT Solar hybrid modules Silverstar GF 250 heat pump AIT, Hydrobus + control system earth register with approx. 500 m pipes.

The 10 hybrid modules have an installed total output of 7.5 kWp thermal and 2.5 kWp electrical.

Even at night, the effective thermal output of 4 kW was measured at (DeltaTu - 12°). In this way, the hybrid modules can be used around the clock as a direct heat source for the heat pump.